Athlon Optics Talos EDC Red Dot Sight

A dot on a carry pistol is one more thing to switch on, unless it never switches off. The Athlon Optics Talos EDC Red Dot Sight is always on: a built-in sensor moves its 3 MOA dot between four brightness settings by itself, for 50,000 hours on one CR2032, in a low-profile composite housing for the RMSc footprint.

Key Features

• Always on, automatic brightness: a sensor reads the light and brightens or dims the dot across four settings. There is no on or off switch.
• 50,000 hours of constant-on illumination from one CR2032 battery.
• RMSc footprint, Glock MOS plate in the box: it mounts directly to many RMSc slide cuts with the included M4x10 screws, or on the pistol maker's RMSc plate. On a Glock MOS pistol, the included plate (for Glock-brand MOS pistols only) goes on with the M3x6 screws and the sight on top with the M4x10s.
• 3 MOA dot at 1x, unlimited eye relief.
• Windage and elevation screws: each turn moves the dot 64 MOA, with 80 MOA of total adjustment, so make small turns when sighting in.
• 0.36 oz and 1.6 inches long, with a 0.55-inch center height.
• Fully multi-coated 22x16 mm window. Nitrogen purged, waterproof, fog proof and shockproof.

Ideal For

• Concealed carry on subcompact pistols cut for the RMSc footprint, such as the Sig Sauer P365, Springfield Hellcat and Glock 43 MOS.
• Shooters who want nothing to switch on, with the dot ready whenever the pistol comes out.
• A first pistol optic, with no brightness to set.

Accessories & Compatibility

• Mounting. Torque the mounting screws to 10 in-lbs with a medium (blue) thread locker, never a permanent (red) one, and mount any adapter plate level on the slide first. The supplied shim always goes between the sight and the slide or plate.
• Battery. The CR2032 sits under the housing, so the sight comes off the slide to change it; confirm zero after remounting.
• Talos EDC PRO. The Talos EDC PRO adds ten brightness settings you set by hand or leave on auto, an on/off switch and an aluminum housing.