Athlon Optics Talos EDC PRO Red Dot Sight

The Talos EDC PRO keeps the Talos EDC's RMSc footprint and adds control. The Athlon Optics Talos EDC PRO Red Dot Sight has ten brightness settings you set by hand or leave on auto, an on/off switch and a one-piece aluminum housing, with a 3 MOA dot and up to 50,000 hours on one CR2032.

Key Features

• Ten brightness settings, manual or auto: press plus or minus to switch it on and step the brightness, hold both together to switch between manual and auto, and hold minus for 3 seconds to switch it off.
• Locked mode: hold plus for 3 seconds and the setting stays put; it can't be changed or switched off until you hold plus again.
• Sleep and memory: in auto mode it sleeps after 5 minutes without motion, and it comes back on at its last brightness if the battery was taken out with the sight on.
• Up to 50,000 hours of illumination from one CR2032 battery.
• RMSc footprint: it mounts directly to many RMSc slide cuts with the included screws, or on the pistol maker's RMSc plate.
• 3 MOA dot at 1x, unlimited eye relief, with 80 MOA of windage and elevation adjustment.
• 0.36 oz and 1.6 inches long, with a 0.54-inch center height.
• Fully multi-coated 22x16 mm window on a one-piece aircraft-grade aluminum chassis. Nitrogen purged, waterproof, fog proof and shockproof.

Ideal For

• Compact and subcompact carry pistols cut for the RMSc footprint, or with a compatible mounting plate.
• Shooters who want to set the brightness themselves, with auto mode for when they don't.
• Holsters and range bags, with locked mode to stop the setting changing by accident.

Accessories & Compatibility

• Mounting. Torque the mounting screws to 10 in-lbs with a medium (blue) thread locker, never a permanent (red) one, and mount any adapter plate level on the slide first. The supplied shim always goes between the sight and the slide or plate.
• Talos EDC. The Talos EDC is the always-on version, with automatic brightness and a composite housing.