Explore Scientific Camera Dovetail Plate

To move the ¼-20 bolt from one slot to another, ensure the 3/8-16 adapter is removed, then slide the bolt to the end of the slot that is wider. Using the swivel handle on the bolt, unscrew the bolt. It may be helpful to press down from the top while unscrewing from the bottom. Once the ¼-20 bolt is removed, place it in the desired slot, where the end is wider, and screw it in.

To move the spring-loaded pin, use a 4 mm Allen (hex) wrench to unscrew the set screw. With the set screw removed, carefully turn over the plate to remove the small spring and pin. Be careful to not lose the dark-color spring or pin.

Select the hole where the spring-loaded pin needs to be installed and put the pin in the hole. Be sure to put it in with the thin side down and ensure that the pin aligns with the hole so the silver tip is sticking out. The flange should be on top. Place the spring into the hole, then install the set screw. Do not overtighten or the pin will no longer be spring-loaded.

To install a camera, align the ¼-20 screw to the mounting hole in the camera or lens, then screw in the bolt. Tighten as needed. If additional pressure is needed, tighten the spring-loaded pin.

Limited Lifetime Warranty. Explore Scientific warrants this product to be free from defects in materials and workmanship for the useful life of the product. Coverage applies to the original purchaser, is non-transferable, and requires proof of purchase from an authorized dealer — AstroTelescopium is an authorized Explore Scientific dealer. Register your product within 60 days of purchase to activate coverage. Explore Scientific also provides free adjustment, cleaning and collimation service on their branded products even beyond the warranty period; round-trip shipping is the customer's responsibility.